Conveyor Calculation Work Sheet

Customer____________________________
Conveyor Number_____________________

Quotation Due Date:_____________________
Request for Quote Number:_______________

_____Dia x Length L=___________	Recommended % Trough Loading:_______________
Material:_______________________	Material:HP Factor: Fm =______________________
Required Capacity:______________	Recommended Component Series:______________
Density: W = __________________	PCF (lbs/cubic ft) Recommended Hanger Bearing____________
Maximum Lump Size:____________	inches,___________%	Notes:__________________________
_______________________________________________________________________________________
Required Capacity = C = _________	CFH (Cubic Feet/Hour)

CFH = Pounds / Hr W	CFH = Bushels / Hr x 1.25		CFH = Tons / Hr x 2000 W
_______________________________________________________________________________________

Equivalent
Capacity =

Req'd Capacity

CF1

CF2

CF3

CF4

CFH

_____________

____________

_______________________________________________________________________________________

Screw Diameter = ______________

Select Dia from "At Max RPM" for recommended % loading where listed capacity equals or exceeds equivalent capacity.

Screw RPM = N =______________=

Equivalent Capacity
Capacity "At 1 RPM" for diameter selected

	L	N	Fd	Fb
HPf =	( )	( )	( )	( )	=	________________
___________________________________________________ 1,000,000

HPm =

( )

________________

__________________________________________________________________ 1,000,000

If HPf + HPm is less than 5.2, select overload factor Fo=_______________ Note: if HPf + HPm is more than 5.2, Fo = 1.0

Motor HP = (HPf + HPm) x Fo   =   (                    +                 )    x   (               )
                              e                                 (                     )
Drive: Use_________HP motor w/ AGMA class (I) (II) (III) reducer at ________Screw RPM
Torque = Motor HP x 63025    =                             Inch/pounds
                  Screw RPM
List Minimum Sizes: Shaft Dia                Pipe             Bolt/Shear               Bolt/Bearing

Select Components:

Through                      Screw                     Hanger Style                Hanger Bearing                   Cover